Baker Roofing Company
Facebook Instagram Youtube Pinterest
  • 888-585-1915
Main Menu
Main Menu
Schedule an Estimate
Baker Roofing Company

WE SHALL DO GOOD WORK

Hurricane Response

  • Your information is safe with us.
Start a message with us:
scan this to request help with a roofing leak, or roof replacement

LET US HELP!

Hurricane Season in this area can be a stressful time. Baker Roofing Company will be here to help from preparation to post-storm inspections. Here are some important tips to ensure you and your property are ready if a storm comes our way. Remember that your safety is the most important thing, do not try to get onto the roof if you suspect any significant damage. We are here to help you with all of your roofing needs at any time. Following any severe storm, feel free to request a post-storm inspection to ensure your roof has not sustained any damage or new deficiencies that could cause issues in the future.

BEFORE THE STORM

  • Have your roof inspected by a reputable company. Repairs made now can save a lot of unnecessary damage if a storm hits.
  • Be sure any debris is removed from the roof.
  • Check all roof drainage.
  • Trim all vegetation/trees near the roof.
  • Have all rooftop HVAC units inspected and ensure doors are secure.
  • This is also a good time to check on insurance and warranties. Keep them in a safe place.

AFTER THE STORM

  • If you think you may have any damage to your roofing system, Call Baker Roofing Company. DO NOT attempt to get on your roof.
  • Take pictures of any roofing materials that blew off and any damage that can be seen from the ground.
  • If the damage is minor and you do have leaks inside, move all inventory/property away from the area until the leaks are repaired.
  • If the damage is major and a portion or all of your roof has blown off, stay out of the building until a roofing professional is called.

Waterhead

A box-shaped component that connects scuppers to downspouts, helping control the flow of roof runoff and avoiding unsightly cascades. Waterheads are also called conductor heads or rainheads.

See Full Glossary

Expansion Joints

Flexible joints built into a roof system that absorb movement from expansion and contraction. They prevent cracking and leaks at connections between different parts of your roof assembly.

See Full Glossary

Drip Edge

An L-shaped piece of roof edge flashing that helps rainwater flow off the roof and away from the fascia boards. It prevents water from seeping under shingles or other roofing materials, protecting the roof deck from rot.

See Full Glossary

Capillary Action

The process where water moves into tiny gaps or along narrow spaces, often against gravity, because of surface tension. In roofing, it can draw water into seams or cut edges, leading to hidden leaks and damage.

See Full Glossary

Membrane

The waterproof layer in a roofing system that protects the building from water intrusion and reflects sunlight, lowering energy costs. It’s usually the top layer of the roofing system and can be made of materials like TPO, PVC, EPDM, or modified bitumen.

See Full Glossary

Heat welded thermoplastic membrane

A type of white single-ply roofing membrane that’s sealed at the seams using hot air, creating a waterproof layer over the roof. It’s commonly used on flat or low-slope commercial buildings, since these roofs need to most protection from water infiltration.

See Full Glossary

EPDM (ethylene propylene diene monomer)

A black, gray or white rubber roofing membrane known for its long lifespan. It’s commonly used on flat or low-slope buildings and is typically glued down, mechanically fastened or ballasted, not heat-welded.

See Full Glossary

PVC (polyvinyl chloride)

A high-end type of heat-welded thermoplastic membrane that stands up well to oils and chemicals. It’s ideal for restaurants or industrial buildings for its extra resistance, though it usually costs more.

See Full Glossary

TPO (thermoplastic olefin)

A durable type of heat-welded thermoplastic membrane that reflects sunlight and helps reduce cooling costs. It’s a cost-effective option for flat roofs but may not perform as well as PVC in harsh environments.

See Full Glossary

End cap

A metal cap that seals the open end of gutters, flashings, or panels. End caps prevent water from spilling and protect roof edges from corrosion or leaks.
See Full Glossary

Soldered joint

A watertight joint created by joining metal roofing or flashing components together. Soldered joints provide long-lasting, durable seals against water infiltration.

See Full Glossary

Parapet wall

The short wall that extends above the roofline, often around the roof’s edge, to provide safety, block wind, and in some cases help manage water drainage. In roofing, parapet walls are usually capped with coping to keep water from seeping into the wall structure.

See Full Glossary

Retro drain

A roof drain retrofit designed to fit inside existing piping without major demolition. Retro drains are cost-effective solutions for improving drainage on older roofs.  

See Full Glossary